clear voip calls

This command deletes all active calls.

Syntax

# clear voip calls [<Session ID>]

Command	Description
(Carriage Return)	If Session ID isn't specified, all active VoIP calls are cleared.
Session ID	(Optional) If Session ID is specified, the specified call is cleared.

Command Mode

Privileged User

Related Commands

show voip calls active

Example

Displaying and then clearing VoIP calls:

# show voip calls
Total Active Calls: 1
| Session ID    |     Caller         |     Callee         | Origin |      Remote IP     |End Point Type |Duration|Call State
=============================================================================================================================
|326433737      |3005                |2000                |Outgoing|10.8.6.36           |FXS-3/3        |00:00:06|Connected
 
# clear voip calls 326433737
1 Active Calls were Manually disconnected